- Refractory Raw Materials
Calcined Bauxite Ceramic Foundry Sand Corundum Flint Clay Fluorite Mulite Silica Fume Silicon Carbide Silicon Metal Alpha Alumina Powder Spinel Alumina Bubble Aluminum Powder Bentonite Boron Carbide Ceramic Sand Chromium Oxide Green Cordierite Explosion-proof Fiber Forsterite Fused Silica Graphite High Alumina Cement Kyanite Group Minerals Potassium Feldspar Powdery Instant Sodium Silicate Pure Calcium Aluminate Cement Spherical Asphalt White Clay Zirconite Lignin Synthesis of Ferro Silicon Nitride Homogenized Bauxite
- Refractory Products
- Monolithic Refractories
- Ceramic Fiber Products
- Metallurgical Auxiliary Material
- Industrial Kilns And Parts
Steel Fibers High-strength Castables
Description
Our castable products use high-quality refractory raw materials, through scientific matching and strict production process, after layer by layer inspection and qualified, it is stored in the standard library，before the product leaves our factory, may at any time according to your actual use situation and the concrete request carries on the improvement promptly, and the final state-level laboratory after a comprehensive test qualified, and then provide you.
our professional technicians are engaged in the research of refractory castables for nearly 30 years and have rich experience in scientific research and practice. Can fully ensure product quality and safety, and at any time to provide you with professional and comprehensive advice,Welcome to know and negotiate at any time, we will achieve your satisfaction with high-quality products and services.
Specification:
Main uses:
1. GF15:
Suitable for high temperature parts of cement rotary kiln, such as front and rear kiln mouth, kiln door cover, grate cooler and so on.In addition, it can be used in other industrial kiln lining.
2. GF16:
The parts used in cement rotary kilns are the same as GF15,But the heat resistance and strength are better than that of DF15.
3. GF17: It is suitable for high temperature parts such as front and rear kiln mouth, coal injection pipe and so on in large cement rotary kiln. In addition, it can be used in other industrial kiln lining.
4. GF18:
The parts used in cement rotary kilns are the same as GF17,But its maximum temperature is higher than GF17, and its stability and strength are better at high temperature.
We can provide the above castable products before delivery of the comprehensive test report and the results of the different testing agencies to ensure that you provide quality products. and provide you with the construction of the castable, maintenance plan and matching drying kiln temperature curve, can also provide on-site technical guidance and construction services to help you successfully complete the maintenance task.at the same time, the company has regular after-sales service contact, timely understanding of your use, and accordingly improve our production process, strive for your future needs, to provide a higher cost-effective quality products.
our professional technicians are engaged in the research of refractory castables for nearly 30 years and have rich experience in scientific research and practice. Can fully ensure product quality and safety, and at any time to provide you with professional and comprehensive advice,Welcome to know and negotiate at any time, we will achieve your satisfaction with high-quality products and services.
Specification:
| Name Of products | Steel Fibers High-strength High Alumina Low Cement Refractory Castable |
Steel Fibers High-strength Corundum Low Cement Refractory Castable |
|||
| Brands | GF15 | GF16 | GF17 | GF18 | |
| Maximum service temperature,(℃) | 1400 | 1500 | 1600 | 1700 | |
| Bulk density,≥ (After drying at 110℃) |
2.6 | 2.65 | 3.0 | 3.0 | |
| Chemical composition,% | Al2O3,≥% | 75 | 78 | 90 | 92 |
| SiO2, ≤% | 20 | 15 | 6 | 4 | |
| Modulus of rupture,(Mpa) ≥ |
110℃ⅹ24h | 9 | 11 | 14 | 14 |
| 1100℃ⅹ3h | 9 | 11 | 14 | 14 | |
| 1500℃ⅹ3h | / | / | 15 | 15 | |
| Cold crushing Strength,(Mpa) ≥ |
110℃ⅹ24h | 80 | 100 | 100 | 100 |
| 1100℃ⅹ3h | 80 | 100 | 100 | 100 | |
| 1500℃ⅹ3h | / | / | 100 | 100 | |
| Reheating Linear Change,% | 1100℃ⅹ3h | -0.2~0.3 | -0.2~0.3 | -0.1~0.3 | -0.1~0.3 |
| 1500℃ⅹ3h | / | / | -0.2~0.5 | -0.2~0.5 | |
| Water required,(%) | 6-7 | 5.5-6.5 | 5-6 | 5-6 | |
| Forming method | Vibration | Vibration | Vibration | Vibration | |
Main uses:
1. GF15:
Suitable for high temperature parts of cement rotary kiln, such as front and rear kiln mouth, kiln door cover, grate cooler and so on.In addition, it can be used in other industrial kiln lining.
2. GF16:
The parts used in cement rotary kilns are the same as GF15,But the heat resistance and strength are better than that of DF15.
3. GF17: It is suitable for high temperature parts such as front and rear kiln mouth, coal injection pipe and so on in large cement rotary kiln. In addition, it can be used in other industrial kiln lining.
4. GF18:
The parts used in cement rotary kilns are the same as GF17,But its maximum temperature is higher than GF17, and its stability and strength are better at high temperature.
We can provide the above castable products before delivery of the comprehensive test report and the results of the different testing agencies to ensure that you provide quality products. and provide you with the construction of the castable, maintenance plan and matching drying kiln temperature curve, can also provide on-site technical guidance and construction services to help you successfully complete the maintenance task.at the same time, the company has regular after-sales service contact, timely understanding of your use, and accordingly improve our production process, strive for your future needs, to provide a higher cost-effective quality products.
Leave a message: Please fill in your information and we will contact you soon.
